Skip to content

High Water Snake

8 sprays: 2 from the angled tube, 2 from the vertical tube and 4 from the horizontal tube; operated with a handwheel

Height
2633 mm
Overall dimensions
3271 × 2108 mm
High Water Snake, product render

Wet zone

The wet zone depends on how the eight spray elements are set. We define this together with you for each project; the drawing shows the footprint of the object.

  • Overall dimensions of the object
Plan view of the wet zone, 1 m grid3.27 m2.11 m1 m
Plan view, 1 × 1 m grid

Gallery

Impressions based on the 3D model; details of the element may differ.

Specifications

* Indicative: confirmed for each project.

Colour

Colour bands per tube section, changing at the seam; the feet in one colour. Choose from the nine colour lines or your own RAL colours.

High Water Snake

Dimensions

Total height
2633 mm
Overall dimensions
3271 × 2108 mm
Tube / base plate
Ø219.1 / Ø168.3 / Ø88.9 mm / multiple feet

Water and operation

Spray nozzle
8 spray elements (as per workshop drawing); per project (indicative)
Operation
handwheel
Wet zone
depends on the spray element settings (indicative)

Material and colour

Construction
Stainless steel 316, powder-coated; welded to EN 1090-2, EXC2
Finish
Powder coating in colour bands per tube section (bend or straight); changes at the seams, perpendicular to the tube. Feet in one colour
Colour
RAL Classic of your choice per colour band. Shown: RAL 3015, 1015, 1016 and 9010 (Merwestein: colour bands in NCS)
Colour band layout
example based on photos of Merwestein; to be defined per project (indicative)

Installation

Anchoring
Cast-in anchor, 4× M16, to be cast in with the concrete (indicative)
Foundation
Concrete slab or pad footing as specified by the structural engineer; anchor level and flush with the finished floor
Fixing
Base plate with 4 nuts, covered with caps in the base colour
Fixings in 1.4529
on request (indicative)

Safety and maintenance

Daily maintenance
Visual check; indoors, rinse with mains water
Weekly maintenance
Clean the spray nozzle, remove limescale and dirt
Six-monthly maintenance
Indoors: NEN 9200 inspection of stainless steel and fixings
Winter maintenance
Outdoors: drain the supply and blow it dry (indicative)
Standard (indoors)
NEN 9200:2025; the element is in zone A (splash zone). Stainless steel 316 is permitted provided it is inspectable and traceable, checked weekly, inspected every six months and regularly rinsed with mains water

Elements with wet zone

For these elements we show the full specifications and the wet zone.

Contact

Feel free to contact us for more information. We are of course also happy to talk to you by phone.

Design, installation and maintenance by AVASTO Recreation Technology

AVASTO Recreation TechnologyPopulierenweg 41, 3421 TX Oudewater

+31 (0)348 - 560297 recreatietechniek@avasto.nl