LED rings, RGB effects and daylight stripes turn every slide tube into an experience.
We install our light effects in new and existing slides alike. With LED rings we create special effects such as Doppler and vortex. In white or a range of colours, your slide becomes a full-on disco, or a calm, relaxing ride.
Together with you we decide on the effect you want and create a light show that fits your budget. You can easily extend the basic set later, for example with a selection panel or timing.
In Vlissingen, for example, we added themed RGB lighting to an existing slide.
LED spots and LED rings are mounted in the slide. Many colours, combinations and effects can be set, for open and closed slides, indoors and outdoors, as well as in dry slides and playgrounds.
A coated or insulated (closed) slide often needs lighting inside. Light effects are also an ideal way to refresh an existing slide.
With the optional selection panel at the start, riders choose from various colours and effects. Your guests use the slide more often, because every ride is different.
We adapt the panel graphics entirely to your wishes and venue.
By creating stripes or shapes in transparent resin during production and leaving them out of the coating, we produce a translucent layer in the slide. Daylight then falls into the slide in stripes.
The variety is enormous: lengthwise or crosswise stripes, corkscrew, vortex and more, even your logo or mascot. By playing with the spacing between the stripes, we create a sense of extreme speed. The effects are in the polyester itself, without electronics, so maintenance costs are minimal. They can be combined with LED strips, also at a later stage; in that case we pre-install all provisions in our production hall.
With our mounting module you can build lighting into an existing slide without the nuisance of adhesive or polyester odours, and with short installation times. The set is plug-and-play, complete with cabling, controls, drilling template and new signs in a design of your choice, and suitable for standard LED lights and AquaSmash lights.
The LED lights are replaced from inside the slide, so no aerial platform or other equipment is needed. The module suits slides of all sizes, indoors and outdoors, and playgrounds too. The AVASTO LED module has been assessed by an independent inspection body in accordance with the Dutch Attractions and Playground Equipment Decree (Warenwetbesluit attractie- en speeltoestellen), NEN-EN 13451-1, NEN-EN 1069-1 and NEN-EN 1069-2. As a result, fitting it does not require a full re-inspection of the slide, provided the instruction signs are updated.
For large slides and spaces we supply lighting in a special housing with a flange connection, so lights can be fitted and replaced quickly: moving heads, laser shows, smoke machines and speaker systems, also in chlorine environments and salt water. The housing is also available for projectors.
Our LED floodlights give the entire pool environment a different atmosphere. They can be controlled via DMX or RDM or run stand-alone, linked as master/slave, and the suspension system contains no stainless steel.
The LED floodlight specifications come from our product documentation. LED lighting in the slide is tailored to each project.
LED rings and LED spots with adjustable colours and effects.
Floodlight for the pool environment, also suitable for illuminating playgrounds.
Click an image to view it full size.
AquaSmashInteractive game with lamps in the slide
SpeedracerTiming and speed measurement
Light effectsLED rings, RGB and daylight effects
Sound effectsSpeakers for slides and playgrounds
Traffic light unitSmart traffic light with countdown
Tipping bucketTipping bucket with light and sound
Interactive elementsPush buttons and lamps in splash pads
Camera systemA view of slide and pool
Themed playgroundsSunset and Bamboo MadnessEverything on light, sound and play in one overview: all attractions or slide electronics.
Whether you have an initial idea or a full set of requirements, we are happy to help you think it through. A first conversation is without obligation.
Email us a photo, drawing or floor plan of your pool or site. We will look at what is possible and what we can recommend.
Email your photo or floor planAt your site or with us in Oudewater. We will discuss your wishes, the space and what is possible within your budget.
Call to make an appointmentSee how your slide is made in our own production hall in Oudewater and meet the people who build it.
Directions to Oudewater
